We have at long last completely up date the Schwing section main site. Here are some extra pictures of the Schwing. Many thanks to Pierre Rondel for some of his wonderful shots included in this collection.
Monday, 22 October 2012
Tuesday, 16 October 2012
New Air One Electric Video
Airone-14102012 from Jonathan Wells on Vimeo.
This is from the week end too. Very little wind despite the noise from the camera, actually 5-8mph slightly crossed.
It's just amazing what a 1kw can do. Look out for the rolling loop!
Monday, 15 October 2012
No wind!
E gliders have their place but with a distinct lack of any wind and still you need that slope fix we have been playing with our go to light wind machine.
Here's some pictures from the weekends flying using the Vulture F3J on the slope. Purists will be heartened we didn't stick an electric fuse on but pitted against nature making use of light lift and thermals. We did plenty of that too but sometimes as a slope nut you just need the right machine and flying can resume. Of course this makes a great UK style F3J/F5J machine for the flat and many competition flyers do just that but for sports flying on the slope it can be kept moving and just seems to find lift a lot easier than an F3F/B type 3m. A different type of flying but sometimes it's all you need. A bonus is that there's no foamies to get in the way but just watch out for the slower built up thermal soarers hanging in your path!
Point nose down and keep a fair speed on |
3.5m, light and fast enough to be entertaining but thermals away given any sniff of bouyant air. |
Here's some pictures from the weekends flying using the Vulture F3J on the slope. Purists will be heartened we didn't stick an electric fuse on but pitted against nature making use of light lift and thermals. We did plenty of that too but sometimes as a slope nut you just need the right machine and flying can resume. Of course this makes a great UK style F3J/F5J machine for the flat and many competition flyers do just that but for sports flying on the slope it can be kept moving and just seems to find lift a lot easier than an F3F/B type 3m. A different type of flying but sometimes it's all you need. A bonus is that there's no foamies to get in the way but just watch out for the slower built up thermal soarers hanging in your path!
Monday, 8 October 2012
Hurricane maiden
Since all the modifications were done it’s been an age when conditions
and opportunity have coincided to test this new model. During which time I even
threw on a bit of paint to help visibility on this prototype ‘white ghost’(all
our prototypes are just moulded white for simplicity).
Well we had our chance last weekend and weighing in at 1.8kg
+ 3 slugs of ballast (approx another 250g) it was flung off a local westerly
slope in good to moderate conditions with wind speed varying between 10-25mph.
The all moving tail had been set to 0-0 with the wing using an incidence meter
and proved just perfect. It was twitchy in the roll though, way too much
aileron and some expo dialed in during flight. Jonathan Wells, local kid supremo,
did the first flight. A few fast passes and soon it was rolling circles and
even rolling loops!! CG at 98mm was just about spot on. Dives from height pointing
straight down with rolls on the decent and inverted fast passes and it was a
struggle to get the Hurricane back off him! The tracking and smoothness of the
flight is the first impression. It really grooves but eventually it was
wrenched back and I flew it for the most part for the rest of the day. A
session practicing EM style turns just catching the turn with a bit of rudder
to fly through the exit and it became seriously entertaining. The tranny was
passed round and whether it was the super stiffer wing with outsized joiner or
not it certainly was a maiden that could not have been any better. It’s a very
precise machine and it’s roll rate can be a blink of an eye. For a first mouldy
it can be tamed to just carve beautiful shapes in the air. The tracking a joy
to watch. Set up as it was it was incredibly acrobatic and a bit too much for
one of the older pilots! But hey it’s easy to reduce besides rolling loops are
really not in most planes repertoire and this one did it again and again! The
prototype as you might expect is a bit on the heavy side but the improved strength
and structural changes will be carried through. There doesn’t seem to be
anything else we can tinker with.
Massive joiner from the Schwing and of course massive spars to go with it! |
Maiden flight in westerlies 10mph gusting to 25mph |
Stuff of dreams straight out, no drama! |
Here probably see one of the mods clearly, it has an extended nose to make radio install a bit less of a squeeze. |
It tracks like the proverbial rails! |
Muggy day and glad I splashed on some paint. |
Doddle to land with big throws on the brakes |
Young Jonathan Wells flew the maiden, yes he did rolling loops! |
Can't deny it I was very happy indeed! |
I think we are ready to go to production on this!!!
Weekend of test flying!
We had a busy weekend of playing, I mean working!!- We test
flew two planes; the New Air One Electric under power and the prototype of the
Hurricane, our new 2m sports plane. More about this one later.
First the electric powered New Air One. This project was
specifically aimed at F3B electric which as a quick recap meant it needs to be
a slippery largish 3m airframe and light for duration but enough power in the
electric set up to haul up 4kg + when fully ballasted. The original motor,
Hacker FAI was taken out and replaced with a Hacker B50 12s geared running a
16x13 but still with a Castle Creations 100 lite and 4s TP 1800mah 65c. This
saved 50g but reduced the static power to around 1.2kw. AUW is now 2.45kg
without ballast. Current thinking is that around 700w is the minimum required but
will require a longer motor run. I wanted a fast climb and short motor runs to
allow smaller lighter lipos and besides it’s more fun this way! The numbers
look good with the new set up, the original 1.7kw+ set up was a bit too close
for comfort for the esc and lipos especially as I wanted to use a Ubec to power
the radio gear saving the weight of a separate RX battery: static tests now
showed 93a.
Remotored with B50 12s geared running 16x13 with CC100 lite and 2+2s TP 65c 1800mah |
The first reflight was on the slope. Power on and it went
scolding away with a short speed up whilst the delayed start up kicked in and
the motor and prop began to bite. The thrust line was set up with 3.5 degrees
down thrust which meant it didn’t automatically climb on power. A small dab of
up and after only a few seconds it was very high above the slope. Power off and
the brake worked a treat with props folding back immediately. Of course with
all that height it was pointed down and screamed across the slope with some F3F
practice pulling some very high speed turns- what a laugh!
To be fair the conditions were good and needed ballast so
the New Air One was light but the power was nonetheless impressive.
Later we down loaded the logged data and saw around 1.1kw
dropping to 1kw after a few climbs. Current at this power was around the 80a+.
Not silly but very safe for all the components.
The next day with very little wind we tested the New Air One
on the flat. The conditions were thermic and variable wind directions but
predominately from the S/E. A straight throw and power on after release saw the
plane speed up and with a dab of up point 70-80 degrees. It needed less than 5s
to get to 250-300m and power off saw the New Air One continue on it’s
trajectory gaining even more height. Vertical climbs are effortless and the
longest logged power run was just over 6s. The high pitch prop gives good speed
so much that we did one power run at around 20 degrees and pulled to vertical
at the end after power was off gaining nearly as much height as all the other
climbs! At over 200w per lb- it’s definitely hotliner territory! It makes me think about my other hotliners of the past which had more power but considerably more weight too, perhaps they did climb faster but this is no slouch and obviously a very efficient use of power for such short motor runs being required. It doesn't make that contorted bark of cavitating props though! It just pulls without fuss and very little noise. Of course a loud prop isn't efficient but it does sound great and very scary! Thing is though doubling the power doesn't give double the performance when dealing at these levels. Which isn't the case at lower power levels say 500w to 1000w as the difference is huge but 1kw to 2kw is much less than you might think and even less from 2kw to 4kw.
1kw for this plane as we have found is very nice indeed.
1kw for this plane as we have found is very nice indeed.
The New Air One Electric felt very buoyant and cruise speed
could be slowed down due no doubt to it’s low weight. It was thermalled away several
times and even once when coming in for a landing when it hit a bit of low level
active air- very satisfying! We drained 3 packs with about 20 climb outs but cautiously
only using about 500mah per pack. There is definitely an opportunity to reduce
the pack size to 1300mah saving another 50g or so. For F3B Electric you only
need one climb, may be 2 per flight if a relaunch is necessary so 10-15s motor
run time is ample, with 1800mah there is 60s available if you dare consume
1500mah, leaving 300mah for the radio.
All in a very promising model and set up. As a do everything
3m electric sports model if your thing is the gliding and not tearing around
under power then it’s pretty much optimized for about 10 climb outs per flight.
Top up climbs when already up will get you more. Then you can tear around
gliding and have quite a thrilling time doing it!
Now 2.45kg, approx 200w+ per lb in old money! That's real hotliner territory. |
We’ll have to see what it can do in F3B but what we can say
definitely is that it makes a good practice model without the fuss of a winch
to haul around.
Subscribe to:
Posts (Atom)